Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets
Bike World Iowa is committed to providing the resources you need to guide you through the increasingly complex headset landscape.
$214.99
The award-winning AngleSet threadless headset makes it possible to change your game. You can transform the head angle of your mountain bike with ease, with up to six offset angle adjustments. Steeper or slacker adjustments from 0.5 to 1.5 degrees, make dialing in the perfect geometry to attack the trail a breeze. The design of AngleSet is head-tube length independent and fits most popular head-tube standards for both tapered and straight forks.
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warrranty
$175.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. This is a tapered headset intended for forks that require a 44mm top headtube diameter, and a 56mm bottom headtube diameter. T
- Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/x
- Top Type: ZS - ZeroStack
- Top Head Tube Inside Dia.: 44.00mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 8mm
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Bottom Type: ZS - ZeroStack
- Bottom Head Tube Inside Dia.: 55.95mm
- Crown Race Seat Dia.: 39.79mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 4mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 88.47g
$145.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$143.99
The Absolute Best
Well over a decade ago, we set out to make the best premium headset on the market. With our 110 Series, we did just that, utilizing optimal materials, the most effective seals and the best aesthetics.
With the flexibility to purchase complete assemblies or separate Tops and Bottoms, tops are available in either short (9mm) or tall (15mm) stack height bearing covers, the 110-Series offers a premium solution for nearly all straight and tapered configurations on the market today. From Integrated (IS) Tops to External Cup (EC) Conversion Bottoms and everything in between, you can mix and match your headset purchase to best meet your needs.
- Technical Description: 110-Series IS41/28.6/H9 | IS52/40
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Bottom Type: IS - Integrated
- Bottom Head Tube Inside Dia.: 52.1mm
- Crown Race Seat Dia.: 39.79mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 1mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: N/A
- Weight: 79.48 grams
$143.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$143.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty
$123.00
The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups.
- Stainless steel Angular Contact Bearings
- Stainless steel crown race
- 1.5'' patented alignment tip for increased durability and performance
- Deep Cup model has 22mm insertion of upper and lower cups
$90.00 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.
- Designed to bridge the gap between the 40-series and 110-series headsets
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 1 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140 mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 1 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140 mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 2 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140 mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 2 Degree Adjustment
- Short version is designed for headtube lengths between 90 - 115 mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 1 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 1 Degree Adjustment
- Short version is designed for headtube lengths between 90 - 115 mm
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 2 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140mm
$104.00
- 1.5" / 1-1/8", 36°/ 45° ACB
- Fits 1-1/8" head tube and 1-1/8" to 1.5" tapered fork
- Fits tapered fork to standard 50mm OD head tube
- Upper: 36°/ 45° ACB (blue seal)
- Lower: 1.5" 36°/ 45° ACB (black seal)
- Alloy crown race
- Stack height 16.9+13.4=30.3mm
- 129 grams
$84.99 - $95.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets.
• Technical Description: EC34/28.6/H16/x
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 34mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 55.26g
$94.99
This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1 1/8-inch fork/headset
- Stack height: 8mm
- 53 grams
$63.99 - $94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$88.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
- Weight: 89g
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC44/40/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.76mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 61.02g
$84.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$84.99
This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1.5-inch crown race diameter
- Stack height: 4mm
- 54 grams
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
Technical Description: ZS56/30/H4/x
Bottom Type: ZS - ZeroStack
Bottom Head Tube Inside Dia.: 55.95mm
Crown Race Seat Dia.: 30.015mm
Crown Race Type: Aluminum, Dual-Seal
Bottom Stack Height: 4mm
Bottom Bearing Type: Top-quality, sealed stainless steel bearings
Material: 7075 aluminum
Weight: 61.34g
Part Number: BAA0156x
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
$82.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$82.99
- Carbon fiber top cover
- Upper: Campagnolo angular contact bearings (black seal)
- 1-1/8-inch, 45 degrees/ 45 degrees ACB upper
- 1.5-inch, 36 degrees/ 45 degrees ACB lower
- For tapered 46mm/56mm OD headtube
- For 1-1/8-inch to 1.5-inch tapered fork
$79.99
- FSA's core line of headsets with built in cable hangers and barrel adjusters for cyclocross applications
- Dual seal, angular contact bearings provide long lasting, smooth rolling performance
- Forged and CNC machined 6061 T6 alloy cups
- IS: 36x45 degree Cane Creek Integrated, or X: External Cup, traditional available for 1-1/8" applications
- 85g
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$78.00
FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings.
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH Brand 36-degree Angular Contact sealed bearings
- 7075 alloy crown race
- Laser etched aluminum top cap
- EC34/28.6 (36x36) | EC34/30 (36x36)
$77.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 109g
$75.95
Smoothness, longevity and reliability make Campagnolo's Record Threaded Headset the choice of champions. It's the perfect upgrade for your favorite classic steed with a 1-inch, threaded fork.
$74.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$74.95
The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design that promises minimal penetration from the elements.
- Bearing: Sealed cartridge (ACB) - Ti coated
- Material: Alloy
- Stack Height: 28.3mm
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/30/H4/K
• Top Type: ZS - Zero Stack Cup
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 20.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g
$74.00
- 1-1/8", 45°/ 45° ACB upper
- 1.5", 36°/ 45° ACB lower
- Compatible with carbon or alloy head tubes
- For tapered 48mm / 56mm OD head tube
- For 1-1/8" to 1.5" tapered fork
- Carbon fiber top cover
- Upper: Campy angular contact bearing (black seal)
- Lower: 1.5" 36°/ 45° angular contact bearing (black seal)
- Alloy crown race
- Stack height 15.5+0.9=16.4mm
- 91.5 grams
$60.00 - $70.00
The AER headset upper is a great choice for road and mountain bike applications- a high quality durable headset upper with durability and lightweight performance in mind.
- Steel/Aluminum hybrid bearings
$69.99
Cane Creek compatible integrated style bearings fit directly into headtube.
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$69.99
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings.
- Classic shape with modern styling for high-end road bikes
- For threadless steerers
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- Laser etched aluminum top cap
- Weight: 82g
$59.49 - $69.99
Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride.
- 93g including star nut and laser top cap
- Stack Height: 28.5mm
**Anodized colors will vary from batch to batch and may not match exactly
- S.H.I.S.: EC34/28.6|EC34/30
$69.00
- 1-1/8" / 1-1/4", 45°/ 45° ACB
- Compatible with carbon or alloy head tubes
- For tapered 47mm / 52mm OD head tube
- For 1-1/8" to 1-1/4" tapered fork
- Alloy top cover
- Upper : 1-1/8" angular contact bearing black seal)
- Lower : 1-1/4" angular contact bearing (black seal)
- Stack height 15.6+1=16.6mm
- 74 grams
$66.00
The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race.
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH Brand 36-degree Angular Contact sealed bearings
- Laser etched aluminum top cap
$64.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
- Technical Description: EC34/30/H12/x
- Bottom Type: EC - External Cup
- Bottom Head Tube Inside Dia.: 33.95mm
- Crown Race Seat Dia.: 30.015mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 12mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 42.20g
$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
Stainless Steel Bearings provide unparalleled corrosion resistance
Highly recommended if your headset will be exposed to wet conditions or sweat
Lifetime warranty
$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 45.25g
$63.99
This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K|IS52/40/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 87g
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$26.00 - $62.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$61.19
Origin8's Twistr Semi-Integrated & External Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork.
- AL6061 top cap
- Forged stainless steel bolt
- Includes star nut
Page 1 of 3
Next page