Filter By:
- Bar Ends (18)
- BMX (89)
- Bottom Brackets (229)
- Brakes/Levers/Pads (760)
- Cables (232)
- Cassettes/Freewheels (139)
- Chainrings (327)
- Chains (148)
- Show More Categories
- Cranksets (311)
- Derailleurs (208)
- Forks (207)
- Groups (27)
- Handlebar Grips/Tape (408)
- Handlebars (282)
- Headsets (164)
- Pedals (415)
- Saddles (435)
- Seatposts (112)
- Shift/Brake Combinations (92)
- Shifters (140)
- Shocks (29)
- Stems (190)
- Other (1523)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Upgrade your riding experience with essential gear from Bike World Iowa .
$442.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset.
Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty.
Features & Benefits:
- Bluetooth low energy technology and ANT+ wireless data transfer
- AxCad – no cadence magnet required
- 10K Temperature Compensation
- Battery – CR2032, 200-hour battery life, change without tools
- Power Balance
- OmniCal – swap chainrings without affecting accuracy
- 2-year warranty
- IPX7 waterproof rating
- Accuracy – within 1.5%, measuring both legs
- Free firmware upgrades with the Qalvin app
Essential Details:
- Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current.
- Available in 130 BCD and 110 BCD.
- Replaces the standard spider.
- A Specialized lockring tool is required for installation.
$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$158.00
- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip.
- The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style.
- TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 196g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$80.00
PD-EH500 pedals
FEATURE
- One side SPD, the other side flat
- Light action binding makes frequent stepping-in & out easier
- Better grip on flat side for wet condition
BENEFIT
- Convenient road touring pedal
- Optimized for urban riding
- Multi-condition
- Best match with CT or MT shoes
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
$38.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$410.00
The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power.
- The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings
- Not compatible with SRAM's 3-bolt direct mount interface
- Hollow Exogram carbon arms
- Spider and chainrings sold separately
- DUB spindle interface
- Compatible with all SRAM Road DUB bottom brackets
- Number of Chainrings: No Rings, No Spider Included
- Crank Intended Use: Road, Tri, Cyclocross
- Pedal Spindle: 9/16"
- Spindle Interface Type: SRAM DUB
- Chainring BCD: Direct Mount SRAM
- BB Included: No
$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$74.99
Ergon's GP5 Grips feature an anatomical design that keeps your hands happy while creating a natural wrist angle for the ultimate in comfort. Complementing the sweet feel, these great grips also offer excellent pressure distribution with 100% support for your hands. You get more grip to hold on to, which improves your control for all types of riding — even technical off-road use. You'll love the integrated bar ends for extra leverage on climbs as well as the built-in bar clamps for fast, secure installation. Try them, you won't go back.
$79.95
The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality.
- Not suitable for use with carbon handlebars
- Uses: touring, commuting
- Clamp: fiberglass composite with rubber inserts
$264.00
Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.
- Designed specifically for heavy-duty demands.
- Pivot bearing offers crisp lever feel and a fatigue-free ride.
- Metallic pads come standard for more power and longer wear.
$1,019.00
ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style.
- New, 38mm chassis for increased stiffness and rider confidence
- Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Charger 2.1 RC2 damper features independent high and low-speed compression adjustments
- Dual Position Air adjustment option to change the geometry of the bike for climbs and descents
- Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package
$17.99
Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$69.99
Ride comfortably on even hot days with Selle Royal's Respiro saddle. It boasts a Cool Cover that keeps the saddle up to 25 degrees cooler, and an innovative ventilation channel to keep the air flowing. Complementing these extraordinary features is Selle Royal's Royalgel that eliminates pressure points for awesome plushness. And, this amazing saddle comes in three models so you can choose the perfect fit. If you want the ultimate in breezy comfort, this is it!
$410.00
Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter.
- 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings
- Hollow Exogram carbon arms
- BB/Spider/Chainrings not included
$31.99 - $33.99
- MODEL NO: CS-HG400-9
- SERIES: SHIMANO ALIVIO M4000 Series
- Compatible chain: HG 9-speed
- Speeds: 9-speed
- Type: HG
$159.00
No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance.
- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance
- Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium
- Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir
- Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement
- Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty
- Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual
$22.99
MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal.
- PU material with anti-slip coating improves grip over traditional cork material
- Gel backing provides vibration damping and extra comfort
- Silicone adhesive for easy install and clean removal
- 78 inches (200cm) per roll
- Finishing strips and bar end plugs included
$633.00
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit.
- Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool
- The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch
- Rear derailleur is compatible with 10-50t and 10-52t cassettes
- The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App
$73.00
The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube.
- Lightweight, aluminum construction
- Available in various widths
- 31.8mm clamp diameter
$19.98
Allows use of two Blendr mounts on a Trek Madone SLR.
Genuine replacement parts
Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike.
Product details
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Trek Madone SLR Aero Integrated handlebar
- Add any accessory mount (sold separately) for an elegant, integrated look
- Includes mounting hardware
$26.95
Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugs
$149.99
TEMPO ARGO R3 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability.
Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution.
Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts.
Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines.
The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort.
Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance.
- Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area
- R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio
- Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement
- Type 2 foam: progressive cushioning, with lower compression modulus
SPECIFICATIONS: TEMPO ARGO R3 150
- Length: 260mm
- Width: 150mm
- Weight: 229g
- Height at 75mm width: 43mm
- Length from nose to 75mm width: 103mm
- Rail: 7 x 7mm
SPECIFICATIONS: TEMPO ARGO R3 160
- Length: 260mm
- Width: 160mm
- Weight: 235g
- Height at 75mm width: 45mm
- Length from nose to 75mm width: 103mm
- Rail: 7 x 7mm
$197.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!
$84.99
- All new DJ/ Slopestyle premier handlebar designed for progression
- 760mm wide
- Featuring our Exclusive Gradient Butting technology
- 31.8mm center bore
- Full bead blast finish for increased durability and fatigue resistance
- 9 degree bend / backsweep and 5 degree upsweep for ultimate comfort
- Available in black ano finish with color graphic options
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 50mm: 323g
- 80mm: 334g
$103.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
$209.99
Ultra-light comfort and control
The all-new RSL 27.2 Seatpost is an ultra-lightest carbon seat post, that now comes with an all-new design with a CnD shape profile for a more controlled and forgiving ride experience.
An ultra-light carbon seatpost with unique shape profile for increased compliance.
- CnD shape profile increases torsional stiffness and vertical compliance
- Designed to offer increased compliance at maximum and minimum insertion points
- 2-bolt design offers independent setback and tilt adjustments (+/- 12 degrees)
- 100% OCLV Carbon fiber shaft and head
- Includes 7x7mm round rail clamp compatibility
- Carbon 7x10mm saddle ears sold separately
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$624.99
- Optimum Power Transfer
- Best Balance For Lighter Weight (-7G) And Efficiency
- New Designed Crank Arm
- Maintains High Rigidity And Reduces Weight
- Hollowglide
- 4-Arm Construction Crankset
- Adapted For Race Specific Disc Brake System
- Shorter Length Of Rear Center With O.L.D. 135mm
- Redesign The Gear Teeth Profile To Fit Wider Gear Pitch
- 50-34T/53-39T/54-42T/55-42T/52-36T
- Iconic Design
- Chain Line: 43.5
$29.99
Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler.
- Directional ramped logo underside
- Proprietary compound extends over Dual Lock Ons
- Vibration dampening, hard wearing, moisture shedding
$17.99 - $19.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included.
- 50 Grams
- Standard Grip Length – 5 1/8"
- Installed Dia. 30mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers
$6.99 - $7.99
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility.
- Steel with chrome finish
- Cogs are splined for Shimano BMX and singlespeed hub compatibility
- Compatible with 1/2-inch and 1/8-inch chains
$34.95
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
- Length: 135mm
- Lock On: Yes
- Weight: 105g
$39.95 - $44.95
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
$29.95
Packed with the performance you have come to expect from the Yeti name, the Hardcore grips are a great choice for riders looking for a soft compound grip with excellent control.
- Large, raised Yeti logo pad cushions your palms
- Smaller angled Yeti logos offer traction for your fingers
- Constructed of our proptietary soft compound material for great feel
- Dual-ply design for better bar adhesion and longer grip life
- Includes Push-In Bar Ends
$32.95
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build.
- Material: 6061 alloy
- Width: 670mm
- Rise: 30mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 25.4mm
- Bar-end compatible: yes
- Weight: 399g
$190.52
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo!
- The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade
- Full hydraulic rim brake system: closed design (no reservoir)
- Mounts to cantilever/linear brake post studs (fork and/or frame)
- Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust
- All hose fittings perfectly hidden with new designed caps
- Compatible with all trigger and twist grip shifters
- Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty
- Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)
$56.00
SRAM’s premier 10-speed chain features hollow pins and cut-out outer plates for accurate shifting in all conditions, light weight, strength and smoothness. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
$133.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
$44.99
A huge leap forward in pedal technology that results in a simpler overall design. Extremely lightweight plastic bodies eliminate the need for bearings and allow for a spindle that is significantly stronger than normal. Metal pins make the pedal very grippy, and the pedal will still function normally when pins are removed from one side for grind tricks. No flimsy outboard end caps. Pedal body halves are easy and inexpensive to replace – instead of replacing the whole pedal.
- 9/16-inch, heat-treated, 4140 chromoly spindle
- Proprietary high-strength plastic composite
$69.99
Ride comfortably on even hot days with Selle Royal's Respiro Moderate Women saddle. It boasts a Cool Cover that keeps the saddle up to 25 degrees cooler, and an innovative ventilation channel to keep the air flowing. Complementing these extraordinary features is Selle Royal's Royalgel that eliminates pressure points for awesome plushness. If you want the ultimate in breezy comfort, this is it!
$179.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$36.99
Dimension Suspension Seatpost
- Clamp Style: Std Rails
- Diameter: 27.2mm
- Length: 350mm
- Material: Aluminum
- Max Height: 255mm
- Min Height: 130mm
- Offset (mm): 0mm
- Seatpost Type: Suspension
- Travel (mm): 35mm
- Weight: 450g
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high.
- Stack height: 36mm
- Weight: 132g (70mm)
$75.00
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style.
- Technology: Flat pedals + LOOK Activ Grip by Vibram
- Body: Composite
- Traction: Vulcanized Rubber Activ Grip + Composite studs
- Spindle: Chromoly+
- Surface area: 107x103mm
- Weight (pedal): 265g
- Weight (pair): 530g
$49.99 - $69.99
Ride comfortably on even the hottest days with Selle Royal's Lookin saddle. Its Cool Cover top keeps the saddle up to 25 degrees cooler. In addition to the lower temperatures, the Royal Vacuum Light construction keeps the weight to a minimum. And last but far from least, Selle Royal's Royalgel eliminates pressure points for ride-all-day plushness. Lookin saddles come in four styles, sure to fit your personal preferences.
$12.95
Mike “Hucker” Clark brings his SoCal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance. The 160mm grip’s California-inspired beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most.
- Features a unique two material design that allows for improved bar adhesion and less grip slippage
- Soft vertical ribs provide excellent padding
- Horizontal ribs on front of the grip offer improved traction
$39.99 - $45.00
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics.
- Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat.
- Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions.
- Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip.
- Tackiest/best hand feel
- Long-lasting PU tape
1 Set includes:
- Two Super Sticky Kush tape rolls
- Two aluminum laser-etched Star Plugz (powder coated or anodized)
- Two high-end rubberized finish tapes
$83.95
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks
$63.99 - $75.99
- Pedal body made of ruggedly durable engineering-grade thermoplastic
- LSL sleeve bushing and sealed bearing
- 9/16" CNC machined Chromoly spindle
- 10 M3-8mm replaceable pins per side
- Platform size: 113mm x 105mm
- 350g per pair
$2,199.00
The pinnacle of cross-country cycling performance can be found in the SRAM XX SL T-Type Eagle AXS™ Transmission Groupset. Built to serve the most demanding rider’s needs in the lightest weight configuration, XX SL Transmission is the evolution of SRAM's World Champion, World Cup winning XX Eagle AXS™.
- AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls
- Engineered as integrated, interdependent transmission components, the XX SL Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface
- XX SL T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleur
- To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged
- Features an overload clutch that accommodates common maintenance
- Ultra-lightweight XX SL T-Type 10-52t cassette offers game-changing inboard and outboard shifting performance under load
- One of the lightest ISO certified crank on the market, the XX SL T-Type carbon crank is maximized for title winning stiffness and features the remarkable XX SL Eagle T-Type direct mount chainring
- XX SL Eagle T-Type Flattop Chain is specifically engineered to optimize Eagle Transmission and features a unique flat top that maximizes shifting performance and robustness
$25.99
Made with recycled materials, this lock-on grip with a unique tread pattern and thick profile adds comfort and control on technical trails.
Lock on to the trail
Confidently handle any trail with the SE Elite Recycled Grip made with recycled plastics in the core. This lock-on grip uses clamps to secure the core for a tight hold in any terrain, while a unique opposing tread pattern provides the perfect amount of traction and padding for your palms.
Using recycled materials in this product helps provide second life to unwanted end of life plastics.
Product details
- Grip core is made from recycled plastic
- Opposing tread pattern absorbs shock in palms and increases grip at fingertips
- Rubber compound provides confident grip, control, and comfort
- Tread features continuous channels to funnel sweat for effective moisture management
- Single-clamp design maximizes grip surface for secure, predictable performance
- Core-lock clamp eliminates slipping by securing grip core to bar
- 3mm M4 bolt increases hold and resists stripping
- 32mm diameter
- Length: 130mm
- Weight: 115g
Features:
The net effect
Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution.
A global issue
Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world.
Better products for a better planet
We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.
$30.99
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes.
- 6061-T6 cast body construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts
- Blendr ready for seamless accessory integration
- Compatible with Blendr Elite bases and Blendr mounts
- Suitable for use on a road, city, or mountain bike
- Safe for use on carbon steerer tubes and handlebars
$17.98 - $19.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$47.99 - $89.99
Shimano's 105 10-Speed Cassette delivers excellent shifting and durability. The cogs are made of long-lasing, smooth-running steel. They have Shimano's engineered tooth shapes for precision shifting. And for lightness, the cassette has an aluminum carrier for the top cogs and nylon spacers.
Page 1 of 107
Next page